F A C I L I T I E S  L I S T

23,000 square feet concrete Class A Building, Built in 2004 on 1-3/4 acres of land

PROGRAMMING
3 - Computers -Core2Duo - MasterCAM V10.

MILLS
**OUR NEWEST ADDITION**
1 - DOOSAN DB250 CM, 118.1" X 78.8" X 63.0" X 19.6", (4 axis) 360,000 position rotary table, 60 tool automatic changer, Fanuc 18i-MB control
1 - OKUMA ACE CENTER MB - 66VB, 59.06” X 25.98” X 25.98” work area w/12,000 Spindle RPM, Coolant thru spindle, Glass scale positioning, HI-   NURBS, Maximum feedrate: 1575
1 - OKUMA 25 X 20 MCR-AF, 102.36" x 78.74" x 31.50" work area w/12,000 Spindle RPM, Coolant thru spindle, Glass scale positioning, HI-    NURBS
1 - CINCINNATI MILACRON, Horizontal Mill 20H-2500 100" X 60" X 25" Full Three (3) Axis retrofitted with Mitsubishi 320-M 32 Bit CNC Control.
2 - CINCINNATI No. 3 Horizontal Cintimatic 40" x 40" work area with Acramatic V positioning control 2 axis circular and linear interpolation, 20" Rotary Table, 2 - 12" x 36" Angle Plates, & 2 - 12" x 12" Angle Plates.
2 - CINCINNATI No. 3 Vertical Cintimatic 20" x 40" work area w/ Acramatic V control 2 axis circular and linear interpolation.
1 - CINCINNATI 5H2500 Horizontal Cintimatic retrofitted with Mitsubishi 320-M 32 Bit CNC Control. 40" x 100" work area - 2 axis contouring.
1 - CINCINNATI 5HB2500 Horizontal Cintimatic retrofitted with Vickers 2100 Acramatic Control. 40" x 100" work area w/ 20" x 100" Sine Plate.
1- FADAL VMC6030 Vertical CNC Mill 60" X 30" Full 3 Axis w/ Rigid Tapping and Tool setter. 10,000 RPM spindle. 30 Position ATC
1- HAAS VF3 Vertical CNN Machining Center w/ 20@ x 40@ work area w/ 4 axis capability

WIRE EDM
1 - AGIECUT CLASSIC – Travel paths 31.5’’X21.65’’X20.67’’, Work piece Size: 51.18’’X39.37’’X19.69, Smallest Wire Diameter: .004’’

CNC LATHES
1 - OKUMA CAPTAIN L470M LIve Tooling
1 - DAEWOO - Puma 700M 35.4" x 65.0" Turning Center w/Fanuc 21iTB CNC Control, Live tooling
1 - DAEWOO – Puma 240M Turning Center w/Fanuc 21iTB CNC Control, Live tooling
1 - DAEWOO B Puma 400 28.0@ x 44.1@ Turning Center w/ Fanuc 18i-TA CNC Control
1 - CNC LEBLOND 24" x 60" TAPE TURN REGAL LATHE with 5-1/4" thru hole spindle, GE-FANUC 21IT CNC Control
1 - CNC LEBLOND 24" X 60" TAPE TURN REGAL LATHE with 9" thru hole spindle, GE-FANUC 0IT CNC Control w/ IBM
1 - CNC LEBLOND TAPE TURN IV with 6 position front & rear turrets, Retrofitted 1997 w/ Mitsubishi Meldus Magic PCCNC Control and drives
1 - CAZENEUVE HB 500 LATHE
1 - BOYE & EMMES 39" X 72" Engine lathe with 42" swing over bed.

WELDING
1 - Lincoln 100 AMP Tig Welder
1 - 250 Amp LINCOLN DC Welder
1 - Acetylene Gas Welder w/ cutting tips.

DRILL PRESSES
1 - 13" x 5' AMERICAN HOLE WIZARD Radial Arm Drill.
3 - 11" DELTA ROCKWELL Bench Drills.

QUALITY CONTROL & INSPECTION EQUIPMENT
ISO 9001-2000 Compliant
Inspection Room, 144 square feet - Temperature Controlled.
1- Faro Portable CMM Platinum Arm - 8 ft Measuring Range
1 - 48" x 48" Granite Surface Plate - Grade: AA
1 - 14" Covel Optical Precision Comparator with accessories.
2 - Sets of Gage pins .062 to .750 in .001 Increments .00005 accuracy.
Vernier Protractors
Assorted Precision Angle Plates
Precision "V" Blocks
Steel Precision Squares
1 - 24" Sine Plate
Mitutoyo Gage Blocks - A+
Radius Gages 1/32" to 2"
1 - Set Adjustable Parallels
Assorted Ring Gages
PANA-MIKES with assorted mandrels .0000 - 1.0000
PANA-MIKES with assorted mandrels 1.0000 - 2.0000
Direct reading Height Gage 0" to 17" .0001 accuracy
1 - MITUTOYO 12" HEIGHTMASTER with bore gage setting accessories

ASSORTED DIAL INDICATORS
Graduated .001, .0005, .000050 movements
2 - OD Micrometers 0 to 12"
ID Micrometers 1-1/2" to 24"
Depth Micrometers 0 to 8"
2 - 24" Vernier Calipers
40" Vernier Calipers
Dial Bore Gages .700 to 4.200 - .0001 graduations

PRESSES
1 - 50 Ton Hydraulic Press

BAND SAWS
1 B Doall C-3300 15 X 15 NC Horizontal Band Saw
1 - KALMAZOO Metal Band Cut-off Machine 9" x 16"
1 - WELLS Model 8A 15" x 18" Automatic Horizontal Band Saw